Radium Oil Catch Can Kit - PCV | 2017-2020 Ford F-150 Raptor (20-0481)

Ford F-150 Raptor Oil Catch Can Kit (PCV) by Radium Engineering

The Radium Engineering catch cans are the most functional and integrated kits on the market. The catch cans mount using factory holes and integrate perfectly with the surrounding components.

Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required.

This catch can runs inline with the PCV (positive crankcase ventilation) valve and retains it's factory function. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run.

Features

• Anodized oil catch can with integrated condenser and dipstick
• Anodized aluminum F150 Raptor specific mounting bracket
• Anodized aluminum -AN adapter fittings and hose ends
• Stainless steel mounting hardware

Please Note: No inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted.

Applications

• 2017 - 2020 Ford F-150 Raptor

What's In The Box?

• 1 - Oil Catch Can
• 1 - Mounting Bracket
• Hoses and Fittings
• Necessary Hardware

References

• Installation Instructions

Warranty

• Manufacturer Standard Warranty