2008-2010 F-550 Super Duty (LARIAT;XL;XLT) V8 6.4 DIESEL Turbo
FIRST PROGRAMMER TO READ AND DISPLAY EGTs, probe included
Provides in-cab display to monitor vital engine functions
Additional 100 HP and 200 ft. lbs of torque
Three power levels
Ships with a custom designed pod
Internet updateable (cable included)
Displays and clear diagnostic trouble codes
Adjustable LED backlight color
Does 0-60 and Quarter mile performance tests with the drag strip Christmas tree lighting and reaction times
Displays Alerts and Records such as RPM, MPH and EGT
Datalogs vital engine information
Able to adjust shift points/pressure
Adjustable speed/rev limiter
0-60 and Quarter mile performance tests with the drag strip Christmas tree lighting and reaction times
Records 5 parameters for up to 60 seconds
The Evolution allows the user to view up to 4 PIDs at one time. There are 11 different PIDs to choose from. Below is a list and description of each:
RPM (revolutions per minute) – Engine speed.
MPH (miles per hour) – Note: Dash display may be +/-3 MPH off from the digital display due to mechanical differences in the spring, etc. used to control the gauge.
BST (Boost Pressure) - PSI
EGT (Exhaust Gas Temp) – Degrees F.
EOT (Engine oil temperature) – Degrees F.
TFT (Transmission fluid temperature) – Degrees F. (Automatic Trans ONLY. If you have a manual trans, the value displayed will be incorrect. Will not display on the 1999 and some 2000 models.)
IAT (Intake air temperature) – Degrees F.
BARO (Barometric pressure) – PSI
BAT (Battery voltage)
DTC (Diagnostic trouble code count)
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Evolution module. Power gains may vary based on vehicle and geographical location.
Level 1: 60 Horsepower - 100 Foot Pounds of Torque
Level 2: 80 Horsepower - 140 Foot Pounds of Torque
Level 3: 100 Horsepower - 200 Foot Pounds of Torque
CARB certification pending. CARB E.O testing currently in progress.
The Evolution programmer has the ability to remove/adjust your vehicle's factory speed limiter. Improper use of this feature could result in a serious or fatal accident. Removal/adjustment of the factory speed limiter is intended for use in a closed circuit, legally sanctioned racing environment. Even if racing in a legally sanctioned racing environment, it is your responsibility to ensure your tires and other vehicle components are rated to travel at increased speeds with the speed limiter removed/adjusted. If you remove/adjust the speed limiter during highway driving, it is your responsibility to obey all driving laws, including adhering to posted speed limits.
Removing/adjusting the speed limiter for purposes inconsistent with the product's intended function, as stated herein, is a violation of the product's intended use and invalidates the product's warranty. Edge Products is not responsible for or liable for the consequences of improper product use.